Medical Video Devices

Add New Medical Video Device

Open Application Settings

To configure medical video, open the AGNES Connect application, and press the gear icon in the lower left of the application window.

Select Devices Section

Select Devices.

Select Medical Video Settings

Select Medical Video.

Add New Device

Click New Device

Configure Medical Video Device

Edit Device

Press the Pencil icon to edit the new devices

Name & Device are required.

Set Name

Name is how the device will be labeled and displayed to users in the portal.

Select Device

Click the drop-down menu to see a list of available imaging devices, then select the desired device.

Select Source

Some video devices provide more than one way for AGNES to capture a video stream. Specify which source to use or select Any Source to have AGNES use the first available source.

Select Codec

AGNES can transmit video encoded in H.264 or VP8. The default is H.264 due to the wide availability of hardware decoding.

Save or Cancel

Click Save to save changes.

Press ESC or click outside the properties’ box to exit without saving.

Optional Medical Video Settings

Set Bitrate

Enter the maximum bandwidth usage as expressed in KBPS.

Set Width

Enter the width in pixels to stream the image to the portal.

Set Height

Enter the height in pixels to stream the image to the portal.

Flip Vertical

Check the box to flip the image vertically.

Flip Horizontal

Check the box to flip the image horizontally.